This past Friday I had a blast spending the day with my mom & a very crafty family friend. We spent the day shopping, lunching, & laughing! I gave a tote full of yarn to our family friend & she really wanted the tote too. That was something I just couldn’t part with, so I decided to make her, her own tote with mini charm squares! This will be a remix of my Quilted Charm Square Tote I posted about in January 2017. I’m adding pockets & showing you how to use some recycled ribbon for the handle. Let’s get sewing!
Disclaimer: This post contains affiliate links which means I may receive a small commission if you buy something through my link or ad. This does not change your cost it just helps keep this blog running. Thanks for your support! See Privacy Policy & Affiliate Deals page for more information.
Mini Charm Madness
OK, I admit it, I have a “mini” problem. Not only do I love these mini charms, but I love just about anything “mini”. Well, except coffee cups cause that’s just a waste of time! : D
When I decided to make this bag, I needed to find the perfect mini charm pack. Our crafty friend lives in the sunny state of Florida, so I decided the bag needed to fit in with all that sunshine. This one is perfect!
Lots of blues, yellows, & grays with a white background. I pulled a yellow floral print from my Color Master bundle & a blue stripe that’s been in my stash for ages. That’s looking a like a day at the beach y’all!
Here’s a better picture of the yellow floral, the pattern doesn’t really show up well in the other photos. This is by Pat Bravo & part of her Floral Elements collection. It’s gorgeous!
This is the “sunflower” color of the print, but the pictures online really show it much lighter & don’t do it justice!
For the handle, I’m using some blue/gray ribbon recycled from a blanket purchase. My mother recently gave her guest room a makeover & this came off a new blanket purchased for the room. These make wonderful bag handles!
To recap the “ingredients” for this project:
- 36 mini charm squares or 2 1/2″ squares
- 1 fat quarter for the bottom & interior pocket {cut to two 8 1/2″ x 12 1/2″ pieces & two 5″ x 12 1/2″ pieces}
- 2 fat quarters for the lining {cut to 12 1/2″ x 14″ or use outer pieces after quilting for templates as shown below}
- 2 – 24″ x 1 1/2″ to 2″ wide pieces of grosgrain ribbon
This used up almost all of the charm pack, but that’s okay. I’m a member of the Fat Quarter Shop’s Mini Charm Pack Club, so I’ll be getting 4 more soon! ; D
Sewing the Mini Charms
I decided to do 3 rows & 6 columns of mini charms across the top of each side. There were 7 squares left, which means I got an extra! I could have added one more column to each side, but I like this layout.
Once I had my layout for each side, I stitched up each row in the same manner as I do most row quilts. You can read more about that in my Postcard from Sweden post.
With the rows still connected, I headed to the machine and stitch together 3 rows for each side of the bag. Press & trim these to 12 1/2″ x 6 1/2″. The math says they should measure this anyway, but precuts don’t like to follow the rules! ; P
These are all ready to sew to the bottom, except I need to turn them around. The words are all upside down!
Cutting the Bottom & Pocket
For the bottom panels you’ll need two 8 1/2″ x 12 1/2″ pieces. There are several ways to make the inner pocket, but for this project I cut two 5″ x 12 1/2″ pieces from the same fat quarter I used for the bottom panels.
I wanted to use as much of the fat quarter as possible, so I’m sewing the pocket pieces together along the longest sides. This will give me a lined pocket with finished top & bottom. The short edges will be caught in the bag seams.
Turn the pocket right side out & give it a good press.
Sew the bottoms to the mini charm sets & the front & back are ready for quilting.
Bags like these are a great way to use up scrap batting & I had a strip that was the perfect width – yay!
Quilting & Corners
I did some things a little different for this bag than I did for my original quilted charm square tote. First, I didn’t spray baste, in fact, I didn’t baste this at all before quilting. Since this is so small & I wasn’t doing FMQ or a lot of turning, it really wasn’t necessary. Static cling is very helpful sometimes!
I used Gutermann Natural Cotton thread in navy {#5322} & a wavy stitch on the yellow bottom. The wavy lines are centered on the mini charm seams. For the mini charms, I used Aurifil thread in pale flesh {#2315} & stitched 1/4″ from the seams in each direction. Both threads are 100% cotton & both are listed as 50 wt threads. Both threads work great for machine quilting in my opinion.
The original bag patterns calls for cutting out the corners before quilting, but I think cutting them out after is better. I’m also cutting 1 1/4″ squares instead of 2″ squares for this bag. This bag is only 12 1/2″ wide, while the original is 14″ wide, so a smaller square is more proportionate to the bag size.
Another thing I did differently is cut the lining out after I quilted the outer bag pieces. This allowed me to use them as a template to cut out the lining.
This also ensured the lining was the correct size since it’s only one piece. Or so I thought, as we’ll see below!
Adding the Pocket & Finishing Edges
I pinned the pocket piece 5″ above the bottom notch. Be sure to top stitch the side that’s staying open before you pin this in place – unlike the picture you see below! ; P
I basted the sides & stitched about an 1/8″ from the bottom edge. Then I marked two lines 4″ apart, centered on the pocket. Stitch along those lines through all layers & don’t forget to backstitch at each end for reinforcement.
You could pull threads to the back & tie them off if you don’t like the look of a backstitch. However, I find pockets last longer with the backstitch.
I decided to use my serger to sew the outer pieces of the bag, which helps the seams lay a little flatter. I used a regular straight stitch for the lining & reinforced the corners with a second line of stitching.
The original bag had 1/2″ seams, but I used 1/4″+ seams for this bag. That just means they were slightly more than 1/4″, maybe 3/8″ or so.
Please see the original posts for how to add the handles & sew the bag together:
All Finished
Here’s the bag all finished up & you may notice the lining peeking out the top. Somehow my lining was a little too long, but I liked the look, so I kept it that way.
I folded the handles up over the lining band & did a double row of stitching around the top.
The pockets are big enough to hold a cell phone or other crochet supplies or even a snack! : )
I also realized after all the fiddling with the layout of the charm squares I didn’t pay an attention to what might meet up at the seams…
Oh well! I hope ya’ll enjoyed the tutorial & pattern & I’d love to see your bag if you make one. Just tag me with #teadoddles on Instagram or share it in my Teadoddles Makers group on Facebook.
Pin it for later!
